ASME NQA-1 implementation
The American quality assurance standard for nuclear facilities. A customer audit is often enough for a supplier, but an ASME certificate is also available.
- Duration Usually 6 - 12 months
- Verification A customer audit, optionally an ASME certificate
- Standard ASME NQA-1
- Outcome An implemented Quality Assurance Programme
About the standard
A different logic from ISO - and that is the biggest difference
Certification is sometimes not required, because compliance with ASME NQA-1 is usually assessed by the customer itself, through an audit at the supplier. Since 2019 ASME has run its own NQA-1 Certification programme: the audit is carried out by ASME auditors and the certificate is valid for 3 years (a full audit and two interim audits). Whether a customer accepts it in place of its own audit is up to the customer and the contract. The standard says in far more detail what has to be produced: the Quality Assurance Programme, requirements on design, purchasing, special processes, inspection and testing, control of nonconformities and of records. Less room for interpretation, more for specifics.
Who requires it
Most often customers tied to the American market or to technology based on NRC requirements. If NQA-1 appears in the contract, it usually also means agreeing to an audit at your place - and that audit is what settles the supplier's qualification.
Who it is for
- Suppliers working for customers from the American market
- Companies whose customer expects NQA-1 instead of, or alongside, ISO 19443
- Makers of products and materials covered by nuclear-class quality requirements
- Companies preparing for a customer audit
- Organisations that have to decide which route to take
The process
6 stages
Gap analysis
The requirements of Part I of the standard set against what already works in the company. The output tells you how much work really lies ahead.
The Quality Assurance Programme
The top-level document of the whole system: structure, responsibilities, the way control is exercised. Every second-party auditor starts there.
Procedures and instructions
Purchasing and supplier control, special processes, inspection and testing, product status, nonconformities, corrective actions, records.
Training and qualification of personnel
The standard places requirements on competence explicitly. It has not only to be ensured but also documented.
Internal audit
Required by the standard. We check the programme in action before the customer does.
Preparation for the customer audit
We go through the typical questions and the nonconformities that come up most often. During the audit I am available to you.
Outcome
What stays in the company
A Quality Assurance Programme that can be defended clause by clause - because it was built on your process, not on somebody else's template.
- An implemented Quality Assurance Programme compliant with ASME NQA-1
- The full set of procedures covered by the requirements of Part I
- Documented qualification of personnel
- A team prepared for a conversation with the customer's auditor
Questions
Frequently asked questions
Will we get an ASME NQA-1 certificate?
You can obtain one through the ASME NQA-1 Certification programme, which ASME has run since 2019. The standard does not require it, and for a supplier the customer audit provided for in the contract is often enough. We prepare you for both routes: the customer audit and ASME certification.
ISO 19443 or ASME NQA-1?
What decides is what the customer expects and which market you work in. Sometimes both are needed - and then it is worth building one system that meets the requirements of both documents.
Can NQA-1 be implemented on the basis of an existing ISO 9001?
Yes, and that is the sensible way. Some requirements overlap with ISO 9001, but NQA-1 goes considerably further into detail - particularly in purchasing, special processes and inspection.
How long does it take?
Usually 6 - 12 months, much as with ISO 19443. The exact timeline depends on the scope of supply and the maturity of the existing system.
